• Corrotech Zinc Fume Enclosure is fabricated using good quality heavy metal sheet that is mounted on the casing of the galvanizing furnace. During the fabrication of the casings, the connected base plates are welded over the top of the casing on which the fume enclosure can be welded directly. The fume enclosure designed for its easy removal during the replacement of kettle in the future. The enclosure hood is fitted with side doors with windows that are electrically operated using hoists for its vertical movement. The entry and exit of the loaded rack is through the end doors of the enclosure. The entry side end door is operated with pneumatic cylinders located at the top of the roof of the enclosure. The operator can open & close the door using push button station located at a sufficient distance from the floor. The fume enclosure box is provided with lights mounted on the roof of the enclosure. The viewing windows have toughened glass fixed over a steel frame that is hinged with the enclosure. For safety, the side windows movement can be stopped using a grab wire installed over the length of the kettle. In case of any obstruction while lowering of the side windows, the grab wire shall disconnect the power to avoid any possible accident or collision. The extraction duct is provided at the roof on one of sides of the fume enclosure that joins with the fixed duct connecting to the cyclone and scrubber. The vertical movement of the side doors is operated with hoists and controlled using rotary limit switches. The roof is equipped with sodium vapor lamps for visibility of kettle during dipping operation.

“Excellence & Efficency Built Into Every Design”

Download Brochure Inquire Now